Products > Telecommunication Cables

Relemac branded cables are available.

DROP WIRE, JUMPER WIRE & TWIN FLAT Sizes Covered Drop Wire:0.5 mm to 1.2 mm * 2 wire Jumper Wire:0.4 mm to 1.0 mm in Singles. Pairs. Triples and Quads Twin flat:0.5 mm to 0.9 mm Cable Construction   Drop Wire Jumper Wire Twin Flat Conductor Solid Cadmium Copper Solid Annealed Tinned Copper Solid Annealed Tinned copper Insulation Black PVC in the form of an extruded layer in double 'D' form PVC in the form of extruded layer with the required colour PVC in the form of extruded layer with the required colour Twisting N.A. Required number of cores 2/3/4 shall be twisted together to form the required cable N.A. Outer Sheath N.A. N.A. PVC in the form of an extruded layer in Grey colour Reference Specification Drop Wire:TEC No.G/WIR-05/01 August 1993 Jumper Wire:TEC No.G/WIR-10/02 December 1994 Twin Flat:any international specification Application Drop Wire: Used for the outdoor connections between distribution points and subscribers Jumper Wire: For use in the internal locations in various types of exchanges Twin Flat: For use in the telephone connections in subscriber premises.   Jelly Filled & Aerial Size Covered   Jelly Filled Cables Aerial Cables 0.4 mm Upto 800 pair Upto 100 pair 0.5 mm Upto 600 pair Upto 100 pair 0.63 mm Upto 400 pair Upto 50 pair 0.9 mm Upto 200 pair Upto 20 pair Cable Construction Jelly Filled Aerial Cables Conductor Solid Annealed Bare Copper Insulation Solid Polyethylene, coloured as per specification Units 10/20 Pairs shall be laid up to form a unit Super Unit 5 unit of 10p/20p laid up to form a super unit of 50p/100p Cable Core Laying 10p/20p unit /50p/100p super unit laid up to form a Cable Core Jelly Filling Jelly shall be filled in the interstices of cable core Not Applicable Polyester Taping Polyester tape applied longitudinally/helically over the laid up core/cable Screening PolyAl.tape applied longitudinally over polyester tape with overlap Self Suspension wires/strand Galvanized steel wires as per specification Sheathing Polyethylene applied in the form of an extruded layer Not Applicable Bedding Two PE tapes applied helically Not Applicable Armouring Two galvanized steel tapes applied helically Not Applicable Jacketing Polyethylene applied in the form of an extruded layer Polyethylene applies over cable core & suspension of 8   Reference Specification Stub Cables Conforming to TEC Specification G/CUG-01/02 Fedd;96 Jelly Filled Cables As per TEC specification G/CUG-01/02 Fed;96 Aerial Cables As per TEC specification TK.510.N.92 Any other intentional specification Application Stub Cables Used for outside plant networks, installation between manholes and cabinets Jelly Filled Cables Used for primary and secondary underground distribution networks. Armored cables used for buried installation Aerial Cables Used in the telecommunication network. particularly in Iocal networks on poles and walls